Paper Tube Finishing Mashine Model BK-1
backPaper Tube Finishing Mashine Model BK-1
For cylindrical textile tubes.
Transport of the tubes in the machine by a turret over 6 Stations with following functions:
Working Method and Machine Equipment
Working Method
- Station 1: Feeding funnel for the tubes
- The machine is stopped if there are only 2 or 3 tubes
- Application of the lubricant on both ends of the tube
- Station 2: Curling or round nosing of one or both ends of the tubes
- Station 3: Second curling or polishing of the ends of the tube
- Station 4: Grooving device for one groove
- Station 5: Notching device for semicircular, V-shaped or Y-shaped notch
- Station 6: Ejection of the finished tubes below of the feeding funnel
The machine is equipped with
- Feeding funnel for the tubes
- Motor for main-drive 2,2 kW 4 motors for 2 curling stations each 2,2 kW
- Fan with motor 0,14 kW for cooling the 4 curling discs / round nosing tools
- Lubrication of both tube ends with 2 felt plates supplied with oil from the central greasing system
- Adjustment mechanism to adjusting the machine to the appropriate tube length.
- Tool set for one tube size
Technical Data
| Output Output Infinitely variably |
appr 20 – 100 tubes/min |
| Output recommended |
appr 80 tubes/min 76mm ID 3,5 mm wall thickness |
| Tube length min special equipment |
appr 110 mm appr 55 mm |
| Tube length max |
appr 420 mm |
| Tube outside diameter min max |
appr 50 mm appr 155 mm |
| Wall thickness for curling up to for polishing up to |
appr 4 mm appr 8 mm |
| Electrical installation |
400 Volt, 50 Hz 3-phase current with N and PE |
| Air consumption/compressed air for notching device |
100 NL/min; 6 bar |
| Main drive | 2,20 kW |
| Motors for curling station 4 motors each |
2,20 kW |
| Motor fan | 0,14 kW |
| Dimensions | appr 2,4 x 1,8 x 2,2 m |
| Net weight | appr 3.100 kg |
© Adolf Brodbeck GmbH + Co. KG