AHT
backMulti-Knives-Cutter AHT 350 (AHT 500)
or burr-free cutting of cylindrical paper tubes with knife-shaft.
In one single pass the core is cut off.
Shortest set-up times by easyfied changing of knife-shaft and/or cutting mandrel.
Working Method and Machine Equipment
Working Method
The machine is equipped with
- Feeding Chute for automatic feeding of the tubes incl. photoelectric eye in order to avoid idle running
- V-Counter – Pressure Roller to support the cutting mandrel
- Hardened Cutting Mandre with pusher and ejector for one core-ID
- Knife-Shaft with appr. 30 knives and corresponding spacers for one cutting width
- Knife Lubrication
Technical Data
| Parent Core Length from |
appr 270 - 370 mm (10.630 - 14.566") (appr 300 - 530 mm (appr 11.811 – 20.866")) |
| Cutting Length min |
appr 6 mm (0.236") (appr 5 mm (0.197")) |
| max |
appr 350 mm (13.779") (appr 510 mm (20.008")) |
| Core ID min |
appr 9 mm (0.354") |
| Core OD max |
appr 45 mm (1.772") |
| Wallthicknesses up to with driven knives up to |
appr 2 mm (0.079") appr 4 mm (0.158") |
| Output variable up to |
appr 50 Strokes/min (appr 45 Strokes/min) |
| Recommended Speed |
appr 45 Strokes/min (appr 40 Strokes/min) |
| Cutting Accuracy | appr +/-0.1mm (0.004") |
| Set-Up Time to another diameter to another cutting width to another parent length |
appr 30 min appr 5-10 min appr 15 min |
| Electrical installation |
400 Volts, 50 Hz 3 phase current with N und PE |
| Maindrive | 2.20 kW |
| Drive of mandrel | 1.50 kW |
| Machine Dimensions (LxWxH) |
appr 3.2 x 1.2 x 2.0 m (appr 2.7 x 1.6 x 1.4 m (9 x 5.5 x 4.5ft)) |
| Net weight |
appr 1.050 kg (2.300lb) (appr 1.150 kg (2.500lb)) |
© Adolf Brodbeck GmbH + Co. KG