Convolute Winder W II 75-500

For production of convolute wounded paper cores.
The glue is applied onto the paper web.
Thereby starch glue, dextrin or casein can be used.

Pictures

Input of the machine speed and tube length at operating terminal.
All input data and malfunction signals can be called-off at the terminal.
Production Control via Photocell.
The machine is stopped in case of malfunction.
Monitoring of production in event of malfunction. The machine stops in case of:
no tubes at output station
paper rapture at compensating lever
missing paper sheet at winding station
Machine Drive by frequency converter
Drive of lower transporting rollers by a.c.-motor controlled by limit switch at equalizing lever.
Servodriven upper transporting rollers
Glue Application Device with rollers and additional paper deviation. The first winding layer is free of glue.
Electric drive of the glue rollers. At standstill of the machine the glue rollers are still turning on slowly.
Paper Sheet Orientation to guarantee rectangular feeding of the paper sheet into the mandrel.
Sheet Transporter with needles for save advance of paper sheet to the mandrel.
Protective Covers with Saftey Switches, covering all movable machine parts.
Standard Drive for winding mandrel with 15 rpm.
Winding mandrel for one tube ID.

Machine speed infinitly variable	appr 15 - 45 tubes/min
Speed recommended	appr 40 cycles/min
Tube Length variable	appr 300 - 530 mm (11.811 – 20.866´´)
Tube inner diameter min	appr 10 mm (0.393´´)
Tube outer diameter max	appr 55 mm (2.165´´)
Paper reel width up to	appr 750 mm (29.527´´)
Electrical installation	400 Volt, 50 Hz 3-phase current with N and PE Siemens Control
Pneumatic Installation	60 NL/min at 6 bar
Main Drive electric motor with converter	appr 3,0 kW
Machine dimensions(LxWxH)	appr 3,5 x 1,4 x 1,5 m (12ft x 5ft x 5ft)
Net weight	appr 1.900 kg