Convolute Winder KSR
back
Working Method and Machine Equipment
Working Method
The machine is equipped with
- Operation Terminal on swivel arm with counter for tube production to enter the machine speed and number of tubes required
- PLC – control Siemens S7
- Self - diagnostic - system with fault indication at the terminal.
- Servo controlled advance of paper to program the tube length
- Cross Cutting Device for cutting off the paper sheet according to the programmed tube length
- Roller gluing device to apply glue on the paper web
- Paper Sheet orientation to guarantee rectangular feeding of the paper sheet into the mandrel.
- Needle Carrier for forwarding the paper sheet to the winding mandrel
- Conveyor to transport the tubes out of the machine
- Drive for mandrel for 10 revolutions per tube 14 revolutions on demand
- Support of the winding mandrel
- Winding mandrel chromium plated for ball pen tubes about 4 mm Ø
- Protective Covers with Saftey Switches. Covering all movable machine parts.
Technical Data
| Tube inner diameter min max |
appr 4 mm appr 15 mm |
| Tube external diametermax | appr 17 mm |
| Tube Length variable standard recut |
appr 80 – 176 mm max 170 mm |
| Paper reel width up to max |
appr 220 mm |
| Machine speed infinitely variable max |
appr 120 tubes/min |
| Speed recommended | appr 100 cycles/min |
| Setup-Time | appr 15 – 30 min |
| Electrical installation |
400 Volt, 50 Hz 3-phase current with N and PE Siemens Control |
| Main Drive electric motor with converter |
appr 1,5 kW |
| Pneumatic Installation | 60 NL/min at 6 bar |
| PLC - Control | Siemens S7 |
| Machine dimensions(LxWxH) | appr 2,0 x 1,4 x 1,5 m |
| Net weight | ca. 920 kg |
© Adolf Brodbeck GmbH + Co. KG